For Security… For Protection… For a Smooth Closing…
Quality Through Professionalism!
Certified · Licensed · Insured  

Mold Inspections Mold Sampling Mold Remediation Planning Mold Remediation Contracting EIFS Moisture Inspections Indoor Air Quality Testing Disaster Relief Services Structure Electrical

Exterior Roofs Interior Plumbing Appliances Heating & A/C Full Home Inspections Warranty Inspections New Construction Punch Lists

Top Ten Mold Mistakes To Avoid

1. IGNORING POSSIBLE MOLD HEALTH SYMPTOMS BEING SUFFERED BY ONE OR MORE FAMILY MEMBERS OR CO-WORKERS.
   
   Be concerned about possible mold problems if one or more occupants are suffering from unexplained health problems such as an ongoing itchy eyes, bloody nose, sinus problems, headaches, nose congestion, runny nose, skin rashes, skin sores, coughing, breathing difficulties, difficulty in remembering things and in thinking clearly, feeling disconnected from the world around you, and/or chronic fatigue. Please remember that some occupants may experience mold health symptoms, while others may have none, with all living or working in the same mold-infested area. People differ significantly in their sensitivity to mold.
   
   

2. IGNORING HOME MAINTENANCE PROBLEMS & MOLD CLUES.
   
   You contribute big-time to becoming a mold victim when you ignore roof leaks, plumbing leaks, sewer line leaks, water stains on ceilings, the indoor smell of mold, visible mold growth, high humidity [60% or more to drive mold growth from humidity alone], a wet or damp basement, and a wet or damp crawl space.
   
   
   
   
   

3. ASSUMING THERE IS NO MOLD PROBLEM BECAUSE OF NO VISIBLE MOLD GROWTH
   
   The worst mold infestation problems are often the ones you cannot see inside floors, ceilings, walls, basements, attics, crawl space, and the heating/cooling equipment and ducts. Airborne mold spores are invisible to the eye, very light in weight, and are easily carried in air current movements or in the air flows of your heating/cooling system to mold cross-contaminate your entire house from just one hidden mold problem. Bring in the help of a certified mold inspector to test the air of your basement, attic, interior rooms, and the outward flow from each heating/cooling register for the possible presence of elevated levels of airborne mold spores, in comparison to an outdoor mold control test. The inspector will use a moisture meter to scan all walls and floors for hidden water problems. The inspector will also use a fiber optics inspection device to check for mold growth inside walls, floors, and ceiling cavities.
   
   

4. HOPING THAT A NEW HOME IS MOLD FREE.
   
   Today’s new homes often come with built-in infestation problems because:
   
   

   • Moldy building materials are received from the builder’s supplier. Today’s timbers are not kiln-dried, as in earlier times, and thus contain a high internal moisture content that makes mold growth possible in the timbers.

   • The builder, their supervisors, and employees fail to do quality control in inspecting for and preventing moldy building materials from being used in the home’s construction.

   • The builder stores the inventory of building materials on the outside ground with no plastic sheeting to protect the materials from rain.

   • The construction crew fails to cover the entire home under construction with plastic sheeting at the end of each construction day to protect the building materials from rain. The roof and side walls need to be protected against rain until the entire roof, siding, windows, and doors are totally installed to seal out rain.

   • The builder fails to inspect and test the home for mold growth while it is being constructed and at the home’s completion.

   • The use of modern building materials like chip wafer boards, drywall (plasterboard), & plywood – all of which molds love to eat.

   • Failure to spray all wood-based construction materials on all surfaces with at least one spraying of an EPA-registered fungicide and at least one spraying of the EPA-registered anti-microbial wood protectant.

   
   

5. ASSUMING THAT AFTER A WET AREA HAS DRIED, IT IS NOW MOLD SAFE.
   
   Mold needs moisture to grow and to multiply as it eats your home building materials and personal possessions. This moisture can come from high indoor humidity [above 60% some or all of the year], roof leaks, siding leaks, and plumbing leaks. If mold spores and mold colony growth runs out of moisture, they do NOT die. Instead, they become dormant and can wait millions of years for access to high humidity or a future water intrusion. Dormant mold can make mold-sensitive persons sick. Even the smell of dormant mold can make some people very sick.
   
   

6. USING CHLORINE BEACH TO KILL MOLD.
   
   Do not use ineffective chlorine bleach to try to kill mold growth and mold spores. Bleach is too weak even when freshly manufactured to kill mold. Bleach that sits on store shelves and in your home continually gets ever weaker over the passage of time. In addition, read the manufacturer’s usage directions on the bleach container. The manufacturer does not recommend its use to kill mold. Bleach is NOT an EPA-registered fungicide.
   
   

7. USING OTHER INEFFECTIVE PRODUCTS TO KILL MOLD.
   
   Products such as Kilz, regular paint, paint containing mildewicide element, any paint, Lysol, ammonia, and other household cleaners and disinfectants. Painting over a mold problem does not solve it – it only hides the problem temporarily and gives the mold something delicious to eat – the paint itself.
   
   

8. SPRAYING SOMETHING ON THE MOLD WILL TAKE CARE OF THE PROBLEM.
   
   Only EPA-registered fungicides can kill mold, but just spraying visible mold does not solve mold problems. You need to kill all visible mold encountered in mold remediation, but it needs also to be removed from the home or building, and all of the water and mold damaged building materials need to be thrown out and replaced with mold-free building materials. In addition, the cleaned out area needs to be treated with EPA-registered fungicides and EPA-registered wood protection agents.
   
   

9. TRUSTING THAT GENERAL CONTRACTORS KNOW WHAT THEY ARE DOING.
   
   Most general contractors and their subcontractors cause and leave more mold problems AFTER the alleged remediation than before their work because of:
   
   

   • Failure to find and fix all of the mold infestation locations in a home or building due to incomplete mold inspection and mold testing;

   • Poor and inadequate training;

   • Failure to utilize proper mold containment procedures and effective mold remediation techniques; taking shortcuts that undermine the remediation effort. Insist on hiring only licensed and certified mold inspectors and mold remediation contractors. A state license for mold remediation contractors is require.
      
10. TRUSTING THAT INDUSTRIAL HYGIENISTS AND GOVERNMENT AGENCIES ARE EXPERTS IN MOLD PREVENTION, INSPECTION, TESTING AND REMEDIATION.
    
    The only people who truly care about your family’s health and home investment are yourself and your family. Although there are many mold knowledgeable and mold experienced industrial hygienists, most are not. Hiring an industrial hygienist [trained in industrial safety and health] to find and fix mold problems is often like hiring a dentist to treat your heart problem. Hire a Certified Mold Inspector if you value your family’s health and home investment. Some government websites often promote ineffective and outdated mold remediation ideas like using bleach to kill mold. Government employees do not have the personal experience of having to work in the real world to find and kill real mold that is often hidden in walls, ceilings, floors, heating/cooling systems, attics, basements, and crawl spaces.

 
Your Satisfaction Is Our Primary Goal!
We Care as Much As You Do About Your Home!  

Licensed Home Inspector
Louisiana State Board of Home Inspectors License # 10229
Certified Mold Inspector • Certified Mold Contractor
Member: Greater Baton Rouge Association of Realtors - Associate Member
Board of Realtors - Associate Member

E-Mail:    wzalfenjr@juno.com

Welcome | Mold | Mold Related Illness | Mold Inspection
Mold Removal | Building Inspections | Contact Us